Dental and skeletal features in subjects with missing maxillary lateral incisors: a case control retrospective study.

BACKGROUND: The aim of this study was to investigate the relationship between missing maxillary lateral incisors and the mesio-distal (MD) diameters of the teeth. Occlusal and skeletal characteristics of the patients have been analyzed. METHODS: Seventy-nine patients were included in the study (permanent dentition, mean age: 13.7): 30 subjects with uni- or bilateral maxillary lateral incisors agenesis (study group, SG) and 49 patients with no maxillary lateral incisors agenesis (control group, CG). Orthopanoramics, plaster models and cephalometric analysis were used to perform the evaluations. RESULTS: Compared to the CG, in the SG, most of the teeth had smaller MD diameter. In the bilateral agenesis subgroup, the average differences between teeth diameters were lower than those found by comparing them to the unilateral agenesis subgroup and to the SG. Overjet was reduced on average in the SG. In the SG were found less cases of cross-bite and scissor-bite, less frequency of impaction of at least one tooth and agenesis of other teeth, crowding only in the lower arch, square or ovoid arch shape in the upper arch and square in the lower arch, increased interincisal angle and decreased SN^GoMe. CONCLUSIONS: Upper lateral incisors agenesis, especially in cases of unilateral agenesis, is associated with MD teeth reduction. The agenesis of the upper lateral incisors is associated with a greater probability of agenesis affecting other teeth, molar and canine class II, reduced overjet and overbite, square or ovoid upper arch shapes, increased interincisal angle and reduced total divergence.

Smile esthetic: comparison of perception amongst orthodontists, dental students, orthodontic patients and surgical orthodontic patients

Most patients require orthodontic treatment to improve the esthetics of their smile. Orthodontists must consider how some parameters of mini-esthetics can influence the patient's esthetic perception. Methods: A photograph of the smile of a young female was taken and some modifications were made to the buccal corridor, gingival exposure, smile arc and midline position to assess the influence of these variables on smile attractiveness. Two hundred examiners were selected from four groups: orthodontists (O), dental students (DS), orthodontic patients (OP) and surgical-orthodontic patients (SOP). Each examiner was asked to complete the questionnaire with an approval rating from 1 to 10. Significant level was set at P ≤ 0.05. Results: Only orthodontists considered buccal corridors of 4mm and midline deviation of 1mm as non-esthetic; all other examiners considered gingival exposures ≥3 mm and midline angulation as non-esthetic. All examiners assigned higher satisfaction values to the photo with the concordant smile arc and defined as non-esthetic the covered smile and the reverse smile arc. Patients perceived as non-esthetic only midline deviations of 4mm. The surgical orthodontic patients assigned lower values to the photos and showed greater attention to evaluating the esthetics of the smile than the orthodontic patients. Conclusion: Smile arc, gingival exposure and midline angulation influence smile esthetics; the role of buccal corridors and midline deviation is dependent on the type of examiner

Predictive Analysis of Maxillary Canine Impaction through Sella Turcica Bridging, Ponticulus Posticus Calcification, and Lateral Incisor Anomalies: A Retrospective Observational Study.

Maxillary canine impaction is an increasing dental anomaly and is often related to other dento-skeletal anomalies. The aim of this work is to support the clinician in evaluating the relationship between a displaced maxillary canine and clinical (the features of lateral incisors)/skeletal (ponticulus posticus and sella turcica bridging) anomalies through orthopanoramic radiographs, lateral cephalograms, and plaster casts to identify the parameters that best predict maxillary canine impaction. A retrospective observational study was carried out on the analysis of the medical records, radiographic findings (panoramic radiographs and lateral cephalograms), and plaster casts of 203 orthodontic patients divided into a case group, with at least one impacted maxillary canine, and a control group, without an impaction. A chi-square test and logistic regression analysis were used to analyze the data. A statistically significant association was found between the impaction of the maxillary canine and the female sex, the bridging of the sella turcica, the ponticulus posticus calcification, and the anomaly of the lateral incisor; a logistic regression revealed that these significant variables were found to be positive predictors of impacted maxillary canines, particularly in reference to the impaction in the palatal area. Finding one of these clinical and radiographic elements can represent a predictive sign of the possible impaction of the maxillary canine.

The Dental-BIOfilm Detection TECHnique (D-BioTECH): A Proof of Concept of a Patient-Based Oral Hygiene.

To date, no strong long-term data have been reported about new innovative clinical protocols to manage oral hygiene. An improper management of oral hygiene may lead to an increase in dental implant failure, and to an increase in infective complications in prosthetic rehabilitation. Personalized techniques are strongly required in dentistry and dental hygiene. A customized and personalized approach to oral hygiene is crucial in ensuring not only effective treatment, but also a careful analysis of the general health status of the patient involved in the therapeutic process. D-BioTECH is an acronym for Dental BIOfilm Detection Technique: it is based on a tailored approach to patients, ensuring that the operator actively interacts with the patient and their specific needs, especially during the domiciliary therapy. D-BioTECH is an approach to preventive care: in D-BioTECH, both dental hygienists and dentists play a central role. The use of a personalized approach to oral hygiene is the first step towards increasing implant and prosthesis survival rate; moreover, personalized medicine is strategic for managing and preventing the biological complications associated with several dental risk factors.

How Did the COVID-19 Pandemic Effect Dental Patients? An Italian Observational Survey Study.

The primary aim of this observational survey study was to assess patients' attitudes toward clinical dental practice during the COVID-19 pandemic; the secondary aim was to evaluate patients' attitudes towards oral health by maintaining an appropriate lifestyle and oral hygiene at home. The questionnaire was developed using Google Forms. The questionnaire consisted of three parts: Part A-geographic, demographic, and personal data; Part B-patients' attitude toward oral health selfcare and lifestyle; Part C-patients' attitude toward dental practice. This survey, conducted during the months of November and December 2020, enrolled 1135 subjects throughout Italy. All data were statistically analyzed. COVID-19 has changed patients' approach to dental procedures. Most of the people interviewed lived in families, and their greatest fear was infecting a family member. Restrictive measures forced people to stay at home, which led to an increased consumption of various types of food, including cariogenic foods. People said they felt safe when they went to the dentist, but they also paid special attention to measures to prevent contagion. Among the measures that should be introduced in similar situations in the future, people wanted telemedicine, a phone recall, and the possible use of video clips for home oral care instructions.

Periodontal results of different therapeutic approaches (open vs. closed technique) and timing evaluation (< 2 year vs. > 2 year) of palatal impacted canines: a systematic review.

BACKGROUND: This review evaluates, as a primary outcome, which surgical technique (open vs. closed) and which type of material used for the auxiliaries (elastic vs. metallic) were preferable in terms of periodontal results during the treatment of palatal-impacted canines. The timing of the evaluation of the results was also assessed as a secondary outcome. METHODS: An electronic search of the literature up to March 2021 was performed on Pubmed, MEDLINE (via Pubmed), EMBASE (via Ovid), Cochrane Reviews and Cochrane Register of Controlled Trials (RCTs) (CENTRAL). The risk of bias evaluation was performed using version 2 of the Cochrane risk of bias tool (RoB 2) for RCTs and the ACROBAT NRSI tool of Cochrane for non-RCTs. RESULTS: 11 articles met the inclusion criteria. Only one RCT was assessed as having a low risk of bias and all the non-RCTs were assessed as having a serious risk of bias. This review revealed better periodontal results for the closed technique and metallic auxiliaries. In addition, it revealed that the timing of the evaluation of the results affects the periodontal results with better results obtained 2 years after the end of treatment. CONCLUSION: In the treatment of a palatal-impacted canine, the closed technique and metallic auxiliaries should be preferred in terms of better periodontal results. The timing of the evaluation of the results affects the periodontal results.

Phototherapy and Tailored Brushing Method. Personalized Oral Care in Patients with Facial and Dental Trauma. A Report of a Case.

(1) Background: Traumatic dental injuries are frequent in children and young adults. The facial structures involved in dental trauma may include soft tissues of the face and mouth, bone and dental structures. Dental trauma often results in augmented dental anxiety. Phototherapy can improve stress and pain control thereby improving compliance in young patients with the necessary dental treatments, after dental trauma has occurred. (2) Methods: Phototherapy was performed to enable soft tissue healing. The Tailored Brushing Method (TBM), a personalized approach for at-home oral hygiene procedures, was also utilized, with the aim of improving biofilm control in traumatized patients. (3) Results: The approach hereafter presented made it possible to obtain subjective control of anxiety and pain documented on a visual analog scale (VAS) due to the innovative use of photo-biomodulation. In addition, for the first time, the TBM was adapted to the needs of a patient with facial trauma and illustrated. (4) Conclusions: Phototherapy and TBM were found to be effective in the combined treatment of soft tissue wounds and in the oral care of the traumatized patient.

Periodontal evaluation of palatally impacted maxillary canines treated by closed approach with ultrasonic surgery and orthodontic treatment: a retrospective pilot study.

Aim of this study is the evaluation of the periodontal status of impacted canines treated by closed approach with ultrasonic surgery and orthodontic treatment compared with contralateral spontaneously erupted teeth. The periodontal conditions of the teeth adjacent to the canines (lateral incisors and first premolar) were also considered. 17 patients (9 females and 8 males; mean age: 15.2 years) with unilateral palatal impaction of maxillary canine were selected. All patients were treated by closed-flap surgery with ultrasonic instruments. Periodontal status was evaluated by assessing probing depth (PD), gingival recession and width of keratinized tissue (KT) 4.6 months after the end of the orthodontic treatment, on average. Test group was composed by impacted elements and adjacent teeth and control group by contralateral spontaneously erupted canines and adjacent teeth. Student's t-test was used to compare test and control group values of PD and width of KT. Significance threshold for Student's t-test was set at p < 0.05. The average probing depth values show no significant clinical differences between the test and control groups. Probing depths recorded at the mesiovestibular and distopalatal sides of the impacted canine were statistically significant compared to the control elements (p < 0.05). No gingival recession was detected on the treated canines. The measurement of KT did not differ significantly between the test and the control groups. In conclusion, the ultrasonic surgery for disinclusion associated with a closed approach and orthodontic traction allows the alignment of an impacted palatal canine without damaging the periodontium.

Comparision of profile macro-estethic perception among orthodontists, dentistry students, orthodontic patients and surgical orthodontic patients.

BACKGROUND: The patient's needs should guide the orthodontist in choosing the most appropriate therapy. The purpose of the present survey was to compare the esthetic perception of the facial profile by orthodontists (O), dentistry students (DS), orthodontic patients (OP) and surgical-orthodontic patients (SOP) and to evaluate the influence of gender, age and level of study. MATERIAL AND METHODS: A facial profile photograph of a young female was taken and twelve modified images were made, altering the position of the jaws in protrusion and in retrusion. Two hundred caucasian examiners, divided into four groups (O, DS, OP, SOP), were selected. Each examiner was asked to complete the questionnaire with an approval rating from 1 to 10. An ordinary least square OLS model was applied. Significant levels were set at P ≤ 0.05. RESULTS: All examiners considered a straight profile or a slight retrusion of the maxilla as the most attractive profile. Slight discrepancies (up to 2 mm) in jaw protrusion were barely perceived by patients. Mandibular retrusion (2 and 4 mm) was one of the least appreciated condition by all examiners. Surgical-orthodontic patients assigned lower ratings compared to orthodontic patients. Female subjects assigned lower ratings than males. Patients with secondary school education assigned higher statistically significant values compared to other levels of study. The lowest values were attributed by the sample of age > = 17 years. CONCLUSIONS: The choice of the most appropriate therapy is based not only on a correct diagnosis, but on the evaluation of esthetic and psychological aspects. Key words:Estethic, profile, orthodontic, surgical orthodontic patients.

Mouthwash Based on Ozonated Olive Oil in Caries Prevention: A Preliminary In-Vitro Study.

(1) Background: Ozone (O3) proved to oxidize organic and inorganic compounds, and its efficacy against bacteria, viruses and fungi plasma membranes was of interest. Ozone vehicle can be a gaseous form, ozonated water or ozonized oil. The aim of this in-vitro study was to evaluate the efficacy of ozonated olive oil against Streptococcus mutans. (2) Methods: Two different commercial mouthwashes were tested: Ialozon Blu (IB) (Gemavip, Cagliari, Italy), with ozonated olive oil, and Ialozon Rose (IR) (Gemavip, Cagliari, Italy), with ozonated olive oil, hyaluronic acid and vitamin E. All formulates were analyzed in a dilution range from 2- to 256-folds in saline solution, as to reproduce the salivary dilution. Streptococcus mutans CIP103220 strain was used for the antimicrobial susceptibility test, and the Kirby-Bauer inhibition method was performed to evaluate the Minimum Inhibitory (MIC), Minimum Bactericidal (MBC), and Minimum Biofilm Inhibitory Concentration (MBIC). (3) Results: Both formulates showed the same antimicrobial activity. MIC, MBC, and MBIC were observed for dilution factors of 1/32, 1/8 and 1/8, respectively. The mean value of inhibition zone diameter was 16.5 mm for IB, and 18 mm for IR. (4) Conclusions: The results suggested that ozonized olive oil formulates were able to inactivate Streptococcus mutans avoiding the salivary dilution effect in the oral cavity.

Relationship between upper lateral incisors anomalies and palatal displaced canine: a case-control retrospective study.

BACKGROUND: An observational case-control study was designed to retrospectively assess the association among sex, skeletal and dental variables and the and the palatal maxillary canine impaction. METHODS: The STROBE guidelines were followed. The records of 2195 subjects were analyzed. The data records of subjects with palatally displaced canine (PDC) were compared with the data of randomly selected subjects without PDC. Descriptive statistics, logistic regression model and χ2 test were used. RESULTS: One hundred and one subjects presented at least one PDC; 106 subjects without PDC were randomly selected. From the logistic model, it was found that only gender and persistence of the deciduous canine were significantly associated with PDC. The Chi-square test showed a correlation between the presence of upper lateral incisor anomalies and PDC, otherwise, considering the unilateral impaction, there was no statistically significant difference in the relationship between canine impaction and the presence of the lateral incisor anomalies, on the same or opposite side of the impaction. CONCLUSIONS: The female sex and the persistence of maxillary deciduous canines are associated with PDC. The anomalies of the lateral incisor do not seem to play a mechanistic role, but could rather represent a genetic variable of the canine eruption disorder.

Epidemiology of Malocclusion in 3,491 Subjects Attending Public Dental Service in Rome (Italy): Evaluation of the Orthodontic Treatment Need Index.

AIM: The objective of this epidemiological survey is to investigate the dental-skeletal features of subjects attending the Public Dental Service in Unità Operativa Complessa (UOC) (Orthodontic Department of "La Sapienza University of Rome") and compare them with the existing body of evidence obtained from other surveys. Accordingly, the Index of Orthodontic Treatment Need (IOTN) was employed, in order to achieve a common framework to allow the shaping of public health prevention practices. MATERIALS AND METHODS: A sample of 3,491 subjects in the Orthodontic Department of "La Sapienza-University of Rome" (UOC) was evaluated with the adoption of IOTN to define malocclusion severity. RESULTS: In the result analysis, it was observed that class II malocclusion was more frequent in the sample (40%), and a large part of the examined population also presented mandibular dental crowding (43%), increased overjet (41%), and increased overbite (38%). Only 26.44% (20.17% IOTN 4; 6.27% IOTN 5) had strong need for orthodontic treatment. CONCLUSION: The realization of epidemiological investigations to establish priority for treatment need is, therefore, particularly useful, not only to estimate the prevalence of some clinical conditions in the observed population, but also to plan targeted interventions, such as interceptive and corrective therapies in growing children. CLINICAL SIGNIFICANCE: These interventions could solve specific clinical situations and/or prevent their escalation. Only in this way, it is possible to avoid fragmentation of the limited resources available, using them for patients with an objective need.

Classification and cyclic fatigue evaluation of new kinematics for endodontic instruments.

This study evaluated the effect of new motions of the motor TriAuto ZX2 on the cyclic fatigue of endodontic instruments. Vortex Blue 35.06 instruments were divided into four groups (n = 10) and tested for fatigue in a curved artificial canal (90° and 2 mm radius) using the following motions: continuous rotation (CR), Optimum Torque Reverse (OTR) set at 180° and the Optimum Glide Path (OGP), which was tested at 90° and 240°. The time to fracture (TTF) and the lengths of the fractured fragments were recorded. The mean TTF was significantly different among the groups (anova, P < 0.05): OGP 90° (213.39 ± 27.45), OTR 180° (121.24 ± 17.03), OGP 240° (45.24 ± 5.61) and CR (8.43 ± 1.27). Weibull analysis confirmed the shortest life expectancy for CR and the longest survival for OGP at 90°. The resistance to fatigue was affected by motions and pre-set angles. The proprietary movements that are currently available for endodontic instruments were classified according to their kinematics.

Are Intraoral Radiographs Accurate in Determining the Peri-implant Marginal Bone Level?

PURPOSE: The primary objective of this study was to assess the accuracy of periapical radiographs in determining the peri-implant marginal bone level. The accuracy of the linear measurements on radiographs was considered as the absolute difference between the true, intraoperative or surgical marginal bone level measurements (direct bone measurements during surgical procedures) and the radiographic measured distances. The secondary aims were to identify the variables influencing the radiographic evaluation (arch: mandible/maxilla; implant location: anterior/posterior; timing of implant placement: "early delayed" and "prolonged delayed"). The influence of vestibular and palatal/lingual crestal bone levels was also investigated. MATERIALS AND METHODS: STROBE guidelines were followed. As soon as the implant was inserted, the marginal bone levels were recorded using a straight periodontal probe (intraoperative or surgical measurements). At the same time, periapical radiographs were taken. To standardize the radiographic images, periapical radiographs were acquired using the long-cone parallel technique and film holding system. All radiographs were analyzed by two examiners blinded to the surgical measurements. Intraclass correlation coefficient (ICC) was employed to assess the intraobserver and interobserver variability. The descriptive statistics, t test, and multivariate statistics were used; the threshold for statistical significance was P ≤ .05. RESULTS: Two hundred sixty-eight implants were inserted in 142 patients. The interobserver agreement was 0.980; the intraobserver variability was 0.990 and 0.993. The mean difference between the radiographic and surgical measurements was 0.45 mm (range: 0 to 8 mm; SD: 1.76). Comparing the radiographic and surgical measurements, a statistically significant difference (P = .000) was detected. None of the variables considered (arch, implant location, and timing of implant placement) significantly influenced the accuracy. Neither the vestibular alveolar edge (P = .908) nor the lingual/palatal (P = .485) significantly influenced the accuracy. CONCLUSION: The periapical radiograph statistically significantly overestimates the level of peri-implant marginal bone compared with surgical measurements. The arch, implant location, timing of implant placement, and level of vestibular or lingual/palatal alveolar edge do not influence deviation between the intraoperative peri-implant marginal bone level measurements and the radiographically determined marginal bone levels.

Whole exome sequencing in an Italian family with isolated maxillary canine agenesis and canine eruption anomalies.

OBJECTIVE: The aim of this study was the clinical and molecular characterization of a family segregating a trait consisting of a phenotype specifically involving the maxillary canines, including agenesis, impaction and ectopic eruption, characterized by incomplete penetrance and variable expressivity. DESIGN: Clinical standardized assessment of 14 family members and a whole-exome sequencing (WES) of three affected subjects were performed. WES data analyses (sequence alignment, variant calling, annotation and prioritization) were carried out using an in-house implemented pipeline. Variant filtering retained coding and splice-site high quality private and rare variants. Variant prioritization was performed taking into account both the disruptive impact and the biological relevance of individual variants and genes. Sanger sequencing was performed to validate the variants of interest and to carry out segregation analysis. RESULTS: Prioritization of variants "by function" allowed the identification of multiple variants contributing to the trait, including two concomitant heterozygous variants in EDARADD (c.308C>T, p.Ser103Phe) and COL5A1 (c.1588G>A, p.Gly530Ser), specifically associated with a more severe phenotype (i.e. canine agenesis). Differently, heterozygous variants in genes encoding proteins with a role in the WNT pathway were shared by subjects showing a phenotype of impacted/ectopic erupted canines. CONCLUSIONS: This study characterized the genetic contribution underlying a complex trait consisting of isolated canine anomalies in a medium-sized family, highlighting the role of WNT and EDA cell signaling pathways in tooth development.

Comparison of two different debonding techniques in orthodontic treatment.

AIM: The purpose of this research is to investigate whether and how the adhesive bond failure site varied in relation to the material used for the orthodontic bonding and debonding technique applied. MATERIALS AND METHODS: Two different methods of orthodontic debonding were included in our survey; cutters for orthodontics and debonding plier. Three different materials for the adhesion of the bracket: composite light curing, self-curing composite and glass ionomer cement. The remaining amount of adhesive on the tooth surface is an important parameter that gives information on how the location of the posting site varied during the debonding. 60 dental elements, maxillary and mandibular, previously extracted for orthodontic reasons, as well as periodontal, were included in our research. We investigated a possible significant correlation between different variables (debonding technique and materials for membership) and the ARI index. CONCLUSIONS: The use of orthodontic cutters or debonding pliers does not affect the adhesive bond failure site and both techniques have a tendency to leave a significant amount of adhesive on the surface enamel. In the resin-reinforced glass ionomer cements, detachment occurs at the interface enamel-adhesive and this pattern of detachment increases the risk of the enamel damage during debonding. In both types of composite resins (photopolymerizable or self-curing), the detachment occurs at the interface bracketing adhesive. In this case the amount of remaining adhesive material on the tooth must be removed with further methods, which in addition, increase the risk of iatrogenic injury as well as the working hours.

In vitro evaluation of carrier based obturation technique: a CBCT study.

AIM: The goal of the study was to compare the ability of two different carrier based obturation (CBO) techniques to reach working length and fill in three-dimensions root canal systems, by using CBCT. MATERIALS AND METHODS: Twenty-six extracted molars were scanned with CBCT and 40 curved canals were selected (between 30° and 90°) and divided in two similar groups (n=20). All canals were prepared up to size 25 taper .06 using nickel-titanium instrumentation. The canals in the Group SC were obturated using Soft-Core obturators (Kerr, Romulus, Mi, USA), while Group TH canals (n= 20) were obturated using Thermafil Endodontic Obturators (Tulsa Dental Products, Tulsa, OK, USA), strictly following manufacturers' instructions for use. The obturations were analyzed by means of CBCT to measure the distance from the apical limit of obturation to the apical foramen and the presence of voids inside root canals. RESULTS: There was no significant difference between the two groups in the mean distance of the apical extent of the obturation (t test, p>0.05). Overfilling occurred in only 3 cases (2 in Group TH and 1 in Group SC). The percentages of voids in both groups were very low with no significant difference (Z test, p>0.05). CONCLUSIONS: The two tested CBO techniques showed similar positive results in terms of performance, even if, after checking with verifiers, in most cases the size of the selected Soft-Core obturator was one size smaller than Thermafil.

Two-Dimensional and Three-Dimensional Cephalometry Using Cone Beam Computed Tomography Scans.

Lateral cephalometric radiograph produces a two-dimensional image with several drawbacks. Cone beam computed tomography (CBCT) allows obtaining a three-dimensional representation of the craniofacial structures and seems to overcome the problems of superimposition and magnification, providing more precision than two-dimensional methods. The aim of the current study was to test the intraobserver and interobserver reliability of linear and angular measurements performed on two-dimensional conventional cephalometric images and CBCT-generated cephalograms, and to evaluate if there is a statistically significant difference between the 2 methods of measurements. The sample group consisted of 24 adolescents with a pretreatment digital lateral radiograph and a corresponding CBCT image. A total of 16 cephalometric landmarks were identified and 17 widely used measurements (9 angular and 8 linear) were recorded by 2 independent observers. Intraobserver and interobserver reliability were assessed by calculating Pearson correlation coefficient. Student t-test was used to compare the 2 methods. The threshold for significance was set at P ≤ 0.05.Concerning the intraobserver and interobserver reliability, data showed a statistically significant correlation between all two-dimensional and three-dimensional measurements. The linear and angular measurements of two-dimensional and three-dimensional cephalometry were not statistically different. The results of the current study showed the reliability of both conventional two-dimensional and three-dimensional cephalometry. Linear and angular measurements from CBCT were found also to be similar to conventional measurements. Considering that conventional images deliver the lowest radiation doses to patients, the use of CBCT for orthodontic purposes should be limited.

Morphological and topographical characteristics of posterior supernumerary molar teeth: An epidemiological study on 25, 186 subjects

OBJECTIVES: To investigate the prevalence , gender difference , arch , morphology and position within the arch of supernumerary molar (SM) teeth in a referred Italian Caucasian population.Study DESIGN: Records of 25,186 young patients were evaluated. Only data related to supernumerary teeth in the posterior region of the jaws were analyzed. The diagnosis of hyperdontia was formulated during the clinical and radiological examinations based on panoramic radiographs. Statistical analysis was conducted at level of subjects in the assessment of prevalence of SMs and sex ratio. Statistical analysis was conducted at level of teeth accord-ing to their morphological and topographic characteristics. The analysis of association between supernumerary morphology and arch, between supernumerary position and arch and between morphology and position was performed using the χ2 test (P≤ 0.05).RESULTS: 61 posterior supernumerary teeth were found in 45 patients. The male to female ratio was 2.5:1 ;the mean age was 21.23 (IC:95%).The SMs were found more frequently in the maxilla (62.3%) than in the mandible; supernumerary teeth (60.7%) were more frequent than supplemental teeth. The SMs were mostly of tuberculate shape (56.8%) and paramolars teeth (64.9%) were more common than distomolars. 54% of teeth were erupted in the arch. No statistically significant relationship were found between the supernumerary teeth shape and the arch (P= 0.087) , between supernumerary teeth position and the arch (P=0.511) and between morphology and position (P=0.216). CONCLUSIONS: Epidemiological studies related to supernumerary teeth can be useful to clinicians in the early di-agnosis of this anomaly. In this retrospective study the prevalence of SMs was 0.18%. SMs were more frequent in males and in the maxilla. Supernumerary were more frequent than supplemental; the conical morphology and paramolar position were the most common shape and position